From: David Conger Subject: [Paparazzi-devel] PPZUAV is now shipping Tiny2.11 assembled Date: Mon, 7 Apr 2008 10:10:11 -0700 Hi All, Good News. Paparazzi Tiny2.11 are shipping! PPZUAV (http://www.onefastdaddy.com/catalog). I see Mr. Carr is advertising a lot here so we don't want anyone to miss out on our new items, prices and services. If you ordered a Tiny2.11 the only assemblies not being shipped out right now are the orders waiting on the IR sensors. Those will arrive in 2 days. we did go ahead and put the bootloader, funjet1 code into those ones in preparation for shipping. We say we tested them. How? We also had them checked out and verified all the voltages were right, checked the clock pins on the LPC. Basically did all the checks listed on the Paparazzi Wiki for self assembly / debugging. Since all are built by robots (pick and place) they will all be the same. We just wanted to be sure these first ones passed all those test first...and they did! Check our website (http://www.onefastdaddy.com/catalog) for specials. We can soon take VISA / MC payments directly as well. Also we have added many new items recently. 18mm ceramic emtac antenna, Sarantel helix antennas, programming cables for USB programming and the FTDI cables for bootloading with adapter now avail. We also are the only provider of 4-layer PCB for Paparazzi and will soon provide Tiny1.3 Autopilots and the 17 state IMU (IMU_3J) from the Paparazzi Project (all 4-layer design and yes, with those hard to solder ball-grid components...BTW: it's no problem for our assembly companies robots). You need it we will make it. contact us: address@hidden We won't make it a habit to post here but we also don't want those who are just following the list to think there is only one solution out there for Paparazzi Project items. We are the most complete solution out there.
Copyright 2008 http://lists.nongnu.org/mailman/listinfo/paparazzi-devel